Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Ablerex.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.1.0

Report #1 with driver megatec_usb (detailed comments available)

This device is known to work with driver megatec_usb, now replaced by the blazer_usb one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

95.0

battery.voltage

27.00

battery.voltage.nominal

24.0

driver.name

megatec_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.1.0

driver.version.internal

1.5

input.frequency

50.0

input.voltage

246.5

input.voltage.fault

140.0

input.voltage.maximum

246.5

input.voltage.minimum

246.0

output.voltage

246.5

output.voltage.nominal

240.0

ups.beeper.status

disabled

ups.delay.shutdown

0

ups.delay.start

2

ups.load

12.0

ups.mfr


ups.model

JP01053T

ups.serial

unknown

ups.status

OL

ups.temperature

25.0