Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Eaton.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4

Report #1 with driver snmp-ups

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

ambient.humidity

0.00

ambient.humidity.high

90.00

ambient.humidity.low

5.00

ambient.temperature

0.0

ambient.temperature.high

40.00

ambient.temperature.low

5.00

device.mfr

EATON

device.model

Eaton ATS 230V 16A

device.part

EATS16N

device.serial

GA04F23009

device.type

ats

driver.name

snmp-ups

driver.parameter.pollinterval

2

driver.parameter.port

XX.XX.XX.XX

driver.parameter.synchronous

no

driver.version

2.7.4

driver.version.data

eaton_ats MIB 0.11

driver.version.internal

0.97

input.1.frequency

50.00

input.1.frequency.status

good

input.1.id

1.00

input.1.voltage

229.30

input.1.voltage.status

good

input.2.frequency

50.00

input.2.frequency.status

good

input.2.id

2.00

input.2.voltage

245.40

input.2.voltage.status

good

input.sensitivity

normal

input.source

1

input.source.preferred

1.00

output.current

0.50

output.voltage

230.40

output.voltage.nominal

230.00

ups.firmware

00.00.0009

ups.firmware.aux

JI

ups.status

OL

ups.test.result

no test initiated