Network UPS Tools - PW9130 1000VA-T

Click here to see reports of other supported models from Eaton.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.3-167-g0a00ddb

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

This device is known to support the following variables (values are just examples):

battery.charge	`100.00`
battery.charger.status	`floating`
battery.runtime	`23148.00`
battery.runtime.low	`180.00`
battery.voltage	`41.00`
device.mfr	`Eaton Corporation`
device.model	`PW9130 1000VA-T`
device.serial	`ID: XXXXXXXXXX , Msg: 103006477-7491`
device.type	`ups`
driver.name	`snmp-ups`
driver.parameter.pollinterval	`2`
driver.parameter.port	`X.X.X.X`
driver.parameter.synchronous	`no`
driver.version	`2.7.3-167-g0a00ddb`
driver.version.data	`pw MIB 0.87`
driver.version.internal	`0.91`
input.bypass.voltage	`243.00`
input.frequency	`50.00`
input.phases	`1.00`
input.quality	`0.00`
input.voltage	`243.00`
input.voltage.nominal	`230.00`
output.current	`0.00`
output.frequency	`50.00`
output.frequency.nominal	`50.00`
output.phases	`1.00`
output.realpower	`0.00`
output.voltage	`230.00`
output.voltage.nominal	`230.00`
ups.firmware	`FP: 0.13 INV: 1.29`
ups.firmware.aux	`ConnectUPS Web/SNMP Card V4.34`
ups.load	`0.00`
ups.mfr	`Eaton Corporation`
ups.model	`PW9130 1000VA-T`
ups.power	`0.00`
ups.power.nominal	`1000.00`
ups.realpower.nominal	`900.00`
ups.serial	`ID: XXXXXXXXXX , Msg: 103006477-7491`
ups.start.auto	`128.00`
ups.status	`OL`
ups.temperature	`28.00`
ups.temperature.high	`40.00`
ups.temperature.low	`0.00`
ups.test.result	`Done and passed`
ups.type	`normal`