Network UPS Tools - ePDU Managed Aphel

Click here to see reports of other supported models from Eaton.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.1

Report #1 with driver snmp-ups

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

ambient.humidity	`40.00`
ambient.humidity.high	`95.00`
ambient.humidity.low	`5.00`
ambient.temperature	`28.0`
ambient.temperature.high	`91.00`
ambient.temperature.low	`-11.00`
device.mfr	`EATON \| Powerware`
device.model	`DBQ10634/5`
device.serial	`ADO6750531`
device.type	`pdu`
driver.name	`snmp-ups`
driver.parameter.pollinterval	`2`
driver.parameter.port	`166.99.250.7`
driver.version	`2.6.1`
driver.version.internal	`0.50 (mib: aphel_revelation 0.45)`
outlet.1.current	`0.00`
outlet.1.current.maximum	`0.00`
outlet.1.desc	`Outlet 1`
outlet.1.id	`1`
outlet.1.power	`0.00`
outlet.1.powerfactor	`0.03`
outlet.1.realpower	`0.00`
outlet.1.status	`off`
outlet.1.switchable	`0.00`
outlet.1.voltage	`252.00`
outlet.2.current	`0.00`
outlet.2.current.maximum	`0.00`
outlet.2.desc	`Outlet 2`
outlet.2.id	`2`
outlet.2.power	`0.00`
outlet.2.powerfactor	`0.05`
outlet.2.realpower	`0.00`
outlet.2.status	`on`
outlet.2.switchable	`1.00`
outlet.2.voltage	`252.00`
outlet.3.current	`0.00`
outlet.3.current.maximum	`0.00`
outlet.3.desc	`Outlet 3`
outlet.3.id	`3`
outlet.3.power	`0.00`
outlet.3.powerfactor	`0.17`
outlet.3.realpower	`0.00`
outlet.3.status	`on`
outlet.3.switchable	`2.00`
outlet.3.voltage	`252.00`
outlet.4.current	`0.00`
outlet.4.current.maximum	`0.00`
outlet.4.desc	`A4`
outlet.4.id	`4`
outlet.4.power	`0.00`
outlet.4.powerfactor	`0.05`
outlet.4.realpower	`0.00`
outlet.4.status	`on`
outlet.4.switchable	`3.00`
outlet.4.voltage	`252.00`
outlet.count	`4.00`
outlet.current	`0.00`
outlet.desc	`All outlets`
outlet.id	`0`
outlet.power	`0.00`
outlet.realpower	`0.00`
outlet.voltage	`252.00`
ups.firmware	`01.01.01`
ups.id	`ePDU_Test_Suppor`
ups.macaddr
ups.mfr	`EATON \| Powerware`
ups.model	`DBQ10634/5`
ups.serial	`ADO6750531`
ups.status
ups.temperature	`49.00`
ups.type	`pdu`