Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Lexis.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.3

Report #1 with driver blazer_ser (detailed comments available)

This device is known to work with driver blazer_ser. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.voltage

41.04

battery.voltage.high

39.00

battery.voltage.low

31.20

battery.voltage.nominal

36.0

beeper.status

disabled

device.type

ups

driver.flag.novendor

enabled

driver.name

blazer_ser

driver.parameter.pollinterval

2

driver.parameter.port

com1

driver.version

2.6.3-3534:3545M

driver.version.internal

1.52

input.current.nominal

5.0

input.frequency

50.0

input.frequency.nominal

50

input.voltage

225.1

input.voltage.fault

223.7

input.voltage.nominal

230

output.voltage

230.7

ups.delay.shutdown

30

ups.delay.start

180

ups.load

35

ups.status

OL

ups.temperature

30.0

ups.type

online