Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Mustek.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.2

Report #1 with driver blazer_usb (detailed comments available)

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.voltage

13.00

battery.voltage.high

13.00

battery.voltage.low

10.40

battery.voltage.nominal

12.0

device.type

ups

driver.name

blazer_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.7.2

driver.version.internal

0.11

input.current.nominal

1.0

input.frequency

50.0

input.frequency.nominal

50

input.voltage

241.4

input.voltage.fault

241.4

input.voltage.nominal

220

output.voltage

230.2

ups.beeper.status

enabled

ups.delay.shutdown

30

ups.delay.start

180

ups.load

7

ups.productid

5161

ups.status

OL

ups.temperature

25.0

ups.type

offline / line interactive

ups.vendorid

0665

2.3.0

Report #1 with driver megatec_usb (detailed comments available)

This device is known to work with driver megatec_usb, now replaced by the blazer_usb one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100.0

battery.voltage

13.70

battery.voltage.nominal

12.0

driver.name

megatec_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.3.0-1160M

driver.version.internal

1.5.8

input.frequency

49.9

input.voltage

220.5

input.voltage.fault

220.1

input.voltage.maximum

220.5

input.voltage.minimum

220.1

output.voltage

220.5

output.voltage.nominal

220.0

ups.beeper.status

enabled

ups.delay.shutdown

0

ups.delay.start

2

ups.load

19.0

ups.mfr

unknown

ups.model

unknown

ups.serial

unknown

ups.status

OL

ups.temperature

25.0