Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Online.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.3

Report #1 with driver blazer_usb (detailed comments available)

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.voltage

13.40

beeper.status

disabled

device.type

ups

driver.name

blazer_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.productid

0002

driver.parameter.protocol

zinto

driver.parameter.subdriver

cypress

driver.parameter.vendorid

06da

driver.version

2.6.3

driver.version.internal

0.04

input.frequency

50.0

input.voltage

232.0

input.voltage.fault

1.0

output.voltage

232.0

ups.delay.shutdown

30

ups.delay.start

180

ups.load

0

ups.productid

0002

ups.status

OL BYPASS

ups.temperature

25.0

Temperature is always 25.0 (°C).

ups.type

offline / line interactive

ups.vendorid

06da

2.3.0

Report #1 with driver megatec_usb (detailed comments available)

This device is known to work with driver megatec_usb, now replaced by the blazer_usb one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.voltage

13.30

driver.name

megatec_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.3.0

driver.version.internal

1.5.14

input.frequency

49.9

input.voltage

229.0

input.voltage.fault

0.0

input.voltage.maximum

235.0

input.voltage.minimum

228.0

output.voltage

228.0

ups.beeper.status

disabled

ups.delay.shutdown

0

ups.delay.start

2

ups.load

45.0

ups.mfr

unknown

ups.model

unknown

ups.serial

unknown

ups.status

OL TRIM

ups.temperature

25.0

ups.type

standby