Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Power Shield.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.4.3

Report #1 with driver blazer_usb (detailed comments available)

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.voltage

81.72

battery.voltage.nominal

72.0

beeper.status

enabled

device.mfr


device.model

HV 2K

device.type

ups

driver.name

blazer_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.vendorid

0665

driver.version

2.4.3

driver.version.internal

0.03

input.current.nominal

8.0

input.frequency

50.0

input.frequency.nominal

50

input.voltage

246.1

input.voltage.fault

246.1

input.voltage.nominal

240

output.voltage

0.0

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

00001907

ups.load

0

ups.mfr


ups.model

HV 2K

ups.productid

5161

ups.status

OL

ups.temperature

22.9

ups.type

online

ups.vendorid

0665