Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Powercom.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.3

Report #1 with driver powercom (detailed comments available)

This device is known to work with driver powercom.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

102.3

driver.name

powercom

driver.parameter.modelname

KIN-1500RM

driver.parameter.port

/dev/ttyS0

driver.parameter.type

KIN1500AP

driver.version

2.0.3

driver.version.internal

$ Revision: 0.5 $

input.frequency

49.61

input.voltage

270.8

input.voltage.nominal

230

output.frequency

49.61

output.voltage

270.8

ups.load

33.5

ups.mfr

PowerCom

ups.model

KIN-1500RM

ups.model.type

KIN1500AP

ups.serial

Unknown

ups.status

OL

About this device

In this case, to get correct voltages, you need to add the following to ups.conf:

linevoltage=115

Reported at: