Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Powerware.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.4

Report #1 with driver bcmxcp (detailed comments available)

This device is known to work with driver bcmxcp.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

ambient.temperature

24.5

battery.charge

99

battery.runtime

3999

battery.voltage

69.2

driver.name

bcmxcp

driver.parameter.port

/dev/ttyS0

driver.version

2.0.4

driver.version.internal

0.10

input.frequency

50.0

input.voltage

239.0

output.frequency

50.0

ups.firmware

02.07

ups.load

0.2

ups.model

Powerware Prestige 1000VA

ups.power.nominal

1000

ups.serial

**********

ups.status

OL LB

The value should read OL only; it should be fixed in newer versions of NUT.

ups.voltage.nominal

240