Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Riello.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.5

Report #1 with driver riello_ser (detailed comments available)

This device is known to work with driver riello_ser.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.capacity

7

battery.charge

100

battery.runtime

19200

battery.voltage

27.3

battery.voltage.nominal

24

device.mfr

RPS S.p.a.

device.model

ULC2

device.serial

device.type

ups

driver.name

riello_ser

driver.parameter.pollinterval

2

driver.parameter.port

/dev/ttyS0

driver.version

2.6.5

driver.version.internal

0.01

input.bypass.frequency

50.10

input.bypass.voltage

231

input.frequency

50.10

input.voltage

231

output.L1.current

0

output.L1.power

0

output.L1.realpower

0

output.L2.current

0

output.L2.power

0

output.L2.realpower

0

output.L3.current

0

output.L3.power

0

output.L3.realpower

0

output.frequency

50.10

output.frequency.nominal

50.0

output.power.percent

0

output.voltage

231

output.voltage.nominal

230

ups.firmware

SWM039-01-03

ups.load

0

ups.mfr

RPS S.p.a.

ups.model

ULC2

ups.realpower.nominal

640

ups.serial

ups.status

OL

ups.temperature

31

ups.upspower.nominal

800