# DEVICE:URL:REPORT: https://github.com/networkupstools/nut/issues/601 # DEVICE:COMMENT: # The previously reported issue with the driver crashing is still present. # You can be forgiven for believing that it might be working because `upsc` # is able to return some information for a while until the driver crashes. # After that, only restarting the driver will fix it... # DEVICE:EOC battery.charge: 100 battery.charge.low: 38 battery.runtime: 32 battery.type: PbAc battery.voltage: 13.8 battery.voltage.nominal: 12.0 device.mfr: Emerson Network Power device.model: LiebertPSA device.serial: device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 0001 driver.parameter.synchronous: no driver.parameter.vendorid: 10af driver.version: 2.7.4 driver.version.data: Belkin/Liebert HID 0.17 driver.version.internal: 0.41 input.frequency: 49.9 input.voltage: 233.9 output.voltage: 234.4 ups.load: 27 ups.mfr: Emerson Network Power ups.model: LiebertPSA ups.productid: 0001 ups.serial: ups.status: OL ups.vendorid: 10af