NAME
bicker_ser - Driver for Bicker DC UPS via serial port connections
SYNOPSIS
bicker_ser -h
bicker_ser -a UPS_NAME [OPTIONS]
Note
|
This man page only documents the hardware-specific features of the bicker_ser driver. For information about the core driver, see nutupsdrv(8). |
SUPPORTED HARDWARE
bicker_ser supports all Bicker UPSes shipped with the PSZ-1053 extension module such as UPSIC-1205, UPSIC-2403, DC2412-UPS and DC2412-UPS-LD.
CABLING
The needed cable is a standard pin-to-pin serial cable with pins 2, 3 and 5 (on DB9 connector) connected.
EXTRA ARGUMENTS
This driver supports no extra arguments from ups.conf(5).
INSTANT COMMANDS
- shutdown.return
-
Turn off the load and return when power is back.
KNOWN ISSUES AND BUGS
- ups.delay.shutdown is not honored
-
Although that delay is properly set when sending the shutdown command, it seems some UPS ignore it and use a fixed 2 seconds delay instead.
AUTHOR
Nicola Fontana <ntd@entidi.it>
SEE ALSO
The core driver:
Internet resources:
The NUT (Network UPS Tools) home page: https://www.networkupstools.org/