NAME
nhs_ser - driver for NHS Nobreaks, senoidal line, with serial port
SYNOPSIS
nhs_ser -h
nhs_ser -a UPS_NAME [OPTIONS]
|
Note
|
This man page only documents the hardware-specific features of the nhs_ser driver. For information about the core driver, see nutupsdrv(8). |
SUPPORTED HARDWARE
nhs_ser supports numerous UPS models made by NHS Sistemas Eletronicos LTDA and marketed in Brazil. They feature a serial port and a binary wire protocol.
|
Note
|
Currently this driver only builds on Linux. This is expected to change in future revisions of the code. |
EXTRA ARGUMENTS
This driver also supports the following optional settings:
- baud=num
-
Set the value of serial port baud rate (default: 2400)
- ah=num
-
Battery discharge capacity in Ampere/hour.
- va=num
-
Nobreak NOMINAL POWER in VA.
- pf=num
-
Power Factor to use in calculations of battery time (default: 0.90).
- vin_low_warn_perc=num
-
Voltage In Percentage to calculate warning low level (default: 2.00).
- vin_low_crit_perc=num
-
Voltage In Percentage to calculate critical low level (default: 2.00).
- vin_high_warn_perc=num
-
Voltage In Percentage to calculate warning high level (default: 2.00).
- vin_high_crit_perc=num
-
Voltage In Percentage to calculate critical high level (default: 2.00).
- numbatteries=num
-
Num Batteries (override value from nobreak).
- vbat=num
-
Battery Voltage (default: 12.00).
- debug_pkt_raw
-
Optional flag to enable debug logging of packet bytes.
- debug_pkt_data
-
Optional flag to enable debug logging of data packet decoding.
- debug_pkt_hwinfo
-
Optional flag to enable debug logging of hwinfo packet decoding.
AUTHORS
Lucas Willian Bocchi <lucas@lucas.inf.br>
SEE ALSO
The core driver:
Internet resources:
The NUT (Network UPS Tools) home page: https://www.networkupstools.org/