NUT-RECORDER(8)

NAME

nut-recorder - utility to record device status and values changes

SYNOPSIS

nut-recorder device-name [output-file] [interval]

Note	Two NUT websites This version of the page reflects NUT release v2.7.4 with codebase commited 0b4bfddbc at 2016-03-09T14:24:11+01:00 Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here.

DESCRIPTION

nut-recorder is an utility to record sequences from running devices (such as power failures, or any other value changes) from upsd, and dump it in a .seq format.

The .seq file can then be used by the dummy-ups(8) driver to replay the sequence.

OPTIONS

device-name: Record the changes of this device. The format for this option is devname[@hostname[:port]]. The default hostname is "localhost".
output-file: Optional. Data will be saved to this file. The default is dummy-device.seq.
interval: Optional. The status of the device will be checked every interval. The default is 5 seconds.

EXAMPLES

To record data from ups1@host1 every 10 seconds:

$ nut-recorder ups1@host1' ups1-output.seq 10
. . .
battery.charge: 100.0
battery.voltage: 13.9
battery.voltage.nominal: 13.6
ups.status: OL
. . .
battery.charge: 90.0
ups.status: OB
. . .

You can then define a dummy device in ups.conf(5):

[ups-test]
        driver = dummy-ups
        port = ups1-output.seq

AUTHOR

Arnaud Quette

INTERNET RESOURCES

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/