NAME

tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment

NOTE ABOUT HISTORIC NUT RELEASE

Note
Two NUT websites

This version of the page reflects NUT release v2.7.4 with codebase commited 0b4bfddbc at 2016-03-09T14:24:11+01:00

Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here.

NOTE

This man page only documents the hardware-specific features of the tripplitesu driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

This driver supports the Tripp Lite SmartOnline family (via the serial port).

EXTRA ARGUMENTS

This driver supports the following optional settings in the ups.conf(5):

lowbatt=num

Set the low battery warning threshold in percent at which shutdown is initiated by upsmon(8). By default, the UPS may not report low battery until there are only a few seconds left. Common values are around 25—30.

AUTHOR

Allan N. Hessenflow <allanh@kallisti.com>

SEE ALSO

The core driver:

Other drivers for Tripp-Lite hardware:

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/