VICTRONUPS(8)

NAME

victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

NOTE ABOUT HISTORIC NUT RELEASE

Note	Two NUT websites This version of the page reflects NUT release v2.8.0-rc1 with codebase commited 86af0b98c at 2022-04-01T02:02:27+02:00 Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here.

NOTE

This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.

The Match Lite line may only report a handful of variables. This is usually not a bug - they just don’t support anything else.

CABLING

If your Victron cable is broken or missing, use this diagram to build a clone:

docs/cables/victron.txt

EXTRA ARGUMENTS

This driver supports the following optional setting in the ups.conf(5):

modelname=name: Set model name
usd=delay: Set delay before shutdown on UPS

BUGS

The protocol for this UPS is not officially documented.

AUTHOR

Radek Benedikt <benedikt@lphard.cz>, Daniel Prynych <Daniel.Prynych@hornet.cz>