NAME
bestfortress - Driver for old Best Fortress UPS equipment
NOTE ABOUT HISTORIC NUT RELEASE
|
Note
|
Two NUT websites
This version of the page reflects NUT release v2.8.0-rc3 with codebase commited b065dfa32 at 2022-04-24T17:21:04+02:00 Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here. |
NOTE
This man page only documents the hardware-specific features of the bestfortress driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports old Best Fortress UPS equipment using a serial connection.
EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5):
- baudrate=num
-
Set the speed of the serial connection - 1200, 2400, 4800 or 9600.
- max_load=VA
-
Set the full-scale value of the ups.load variable.
AUTHORS
-
Holger Dietze <holger.dietze@advis.de>
-
Stuart D. Gathman <stuart@bmsi.com>
SEE ALSO
The core driver:
The newer Best Power drivers:
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/