NAME

rhino - Driver for Brazilian Microsol RHINO UPS equipment

NOTE ABOUT HISTORIC NUT RELEASE

Note
Two NUT websites

This version of the page reflects NUT release v2.8.0 with codebase commited ff16dabca at 2022-04-04T11:04:28+00:00

Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here.

NOTE

This man page only documents the hardware-specific features of the rhino driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

This driver has been tested with:

  • Rhino 6000 VA

  • Rhino 7500 VA

  • Rhino 10000 VA

  • Rhino 20000 VA

All Rhino models are sinusoidal on-line.

EXTRA ARGUMENTS

This driver support the following extra optional settings in ups.conf(5):

battext = n - (default = 0, no extra battery, where n = Ampere*hour )

COMMANDS

  • load.on - Turn on the load immediately

  • load.off - Turn off the load immediately

  • bypass.start - Put the UPS in bypass mode

  • bypass.stop - Put the UPS out of bypass mode

  • shutdown.stayoff - Shut down in 3 minutes and do not return

AUTHOR

Silvino B. Magalhães <sbm2yk@gmail.com>

SEE ALSO

The core driver:

nutupsdrv(8)

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/