VICTRONUPS(8)

NAME

victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

NOTE ABOUT HISTORIC NUT RELEASE

Note	Two NUT websites This version of the page reflects NUT release v2.8.0 with codebase commited ff16dabca at 2022-04-04T11:04:28+00:00 Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here.

NOTE

This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.

The Match Lite line may only report a handful of variables. This is usually not a bug - they just don’t support anything else.

CABLING

If your Victron cable is broken or missing, use this diagram to build a clone:

EXTRA ARGUMENTS

This driver supports the following optional setting in the ups.conf(5):

modelname=name: Set model name
usd=delay: Set delay before shutdown on UPS

BUGS

The protocol for this UPS is not officially documented.

AUTHORS

Radek Benedikt <benedikt@lphard.cz>
Daniel Prynych <Daniel.Prynych@hornet.cz>