ADELSYSTEM_CBI(8)

NAME

adelsystem_cbi - Driver for the ADELSYSTEM CB/CBI DC-UPS

SYNOPSIS

Note	Two NUT websites This version of the page reflects NUT release v2.8.1 with codebase commited 4ba352d8f at 2023-10-31T21:46:20+01:00 Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here.

adelsystem_cbi -h

adelsystem_cbi -a DEVICE_NAME [OPTIONS]

Note	This man page only documents the specific features of the adelsystem_cbi driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

This is the driver for the adelsystem cb/cbi dc-ups devices.

The driver has been tested against CBI2801224A, all in one 12/24Vdc DC-UPS.

More information about this UPS can be found here:: https://www.adelsystem.com/en/products/dc-ups-/

EXTRA ARGUMENTS

This driver supports the following optional settings in the ups.conf(5) file:

Serial:

ser_baud_rate=value: A integer specifying the serial port baud rate (default 9600).
ser_data_bit=value: A integer specifying the serial port data bit (default 8).
ser_parity=value: A character specifying the serial port parity (default N).
ser_stop_bit=value: An integer specifying the serial port stop bit (default 1).

Modbus:

dev_slave_id=value: An integer specifying the device modbus slave ID (default 1).

CONFIGURATION

Here is an example of adelsystem_cbi driver configuration in ups.conf file:

[adelsystem_cbi]
  driver = adelsystem_cbi
  port = /dev/ttyUSB0
  desc = "adelsystem cb/cbi ups driver"
  # serial settings
  ser_baud_rate = 9600
  ser_parity = N
  ser_data_bit = 8
  ser_stop_bit = 1
  # modbus slave id
  dev_slave_id = 5

INSTANT COMMANDS

This driver support the following instant commands:

load.off: executes "instant poweroff"

INSTALLATION

This driver is not built by default. You can build it by installing libmodbus and running configure --with-modbus=yes.

You also need to give proper permissions on the local serial device file (/dev/ttyUSB0 for example) to allow the run-time NUT driver user account to access it.

AUTHOR

Dimitris Economou <dimitris.s.economou@gmail.com>