NAME

masterguard - Driver for Masterguard UPS equipment

NOTE ABOUT HISTORIC NUT RELEASE

Note
Two NUT websites

This version of the page reflects NUT release v2.8.1 with codebase commited 4ba352d8f at 2023-10-31T21:46:20+01:00

Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here.

NOTE

This man page only documents the hardware-specific features of the masterguard driver. For information about the core driver, see nutupsdrv(8).

NOTE

Please note that this driver is deprecated and will not receive new development. If it works for managing your devices — fine, but if you are running it to try setting up a new device, please consider the newer nutdrv_qx(8) instead, which should handle all Q* protocol variants for NUT.

Please do also report if your device works with this driver, but nutdrv_qx(8) would not actually support it with any subdriver!

SUPPORTED HARDWARE

This driver supports Masterguard UPS equipment (serial connection only).

EXTRA ARGUMENTS

CS

Cancel the shutdown procedure.

AUTHOR

Michael Spanier <mail@michael-spanier.de>

SEE ALSO

Newer driver:

The core driver:

Internet resources:

The NUT (Network UPS Tools) home page: https://www.networkupstools.org/