NAME
rhino - Driver for Brazilian Microsol RHINO UPS equipment
NOTE ABOUT HISTORIC NUT RELEASE
Note
|
Two NUT websites
This version of the page reflects NUT release v2.8.1 with codebase commited 4ba352d8f at 2023-10-31T21:46:20+01:00 Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here. |
NOTE
This man page only documents the hardware-specific features of the rhino driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver has been tested with:
-
Rhino 6000 VA
-
Rhino 7500 VA
-
Rhino 10000 VA
-
Rhino 20000 VA
All Rhino models are sinusoidal on-line.
EXTRA ARGUMENTS
This driver support the following extra optional settings in ups.conf(5):
battext = n - (default = 0, no extra battery, where n = Ampere*hour )
COMMANDS
-
load.on - Turn on the load immediately
-
load.off - Turn off the load immediately
-
bypass.start - Put the UPS in bypass mode
-
bypass.stop - Put the UPS out of bypass mode
-
shutdown.stayoff - Shut down in 3 minutes and do not return
AUTHOR
Silvino B. Magalhães <sbm2yk@gmail.com>
SEE ALSO
The core driver:
Internet resources:
The NUT (Network UPS Tools) home page: https://www.networkupstools.org/