UPSSTATS.CGI(8)

NAME

upsstats.cgi - Web-based UPS status viewer

SYNOPSIS

Note	Two NUT websites This version of the page reflects NUT release v2.8.1 with codebase commited 4ba352d8f at 2023-10-31T21:46:20+01:00 Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here.

upsstats.cgi

Note	As a CGI program, this should be invoked through your web server. If you run it from the command line, it will either complain about unauthorized access or spew a bunch of HTML at you.

DESCRIPTION

upsstats.cgi uses template files to build web pages containing status information from UPS hardware. It can repeat sections of those template files to monitor several UPSes simultaneously, or focus on a single UPS.

These templates can also include references to upsimage.cgi(8) for graphical displays of battery charge levels, voltage readings, and the UPS load.

ACCESS CONTROL

upsstats will only talk to upsd(8) servers that have been defined in your hosts.conf(5). If it complains that "Access to that host is not authorized", check that file first.

TEMPLATES

The web page that is displayed is actually a template containing commands to upsstats which are replaced by status information. The default file used for the overview is upsstats.html.

When monitoring a single UPS, the file displayed is upsstats-single.html.

The format of these files, including the possible commands, is documented in upsstats.html(5).

FILES

hosts.conf(5), upsstats.html(5), upsstats-single.html