Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from APC.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4.1

Report #1 with driver snmp-ups (detailed comments available)

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

device.mfr

APC

device.model

AP7724

device.serial

5A1516T15268

device.type

ats

driver.name

snmp-ups

driver.parameter.pollinterval

2

driver.parameter.port

xx.xx.xx.xx

driver.parameter.synchronous

no

driver.version

2.7.4.1

driver.version.data

apc_ats MIB 0.2

driver.version.internal

0.99

input.1.frequency

50.00

input.1.voltage

221.00

input.2.frequency

50.00

input.2.voltage

221.00

input.count

2.00

input.frequency.nominal

50.00

input.sensitivity

high

input.source

2.00

input.source.preferred

2.00

input.voltage.nominal

230.00

outlet.group.1.current

7.70

outlet.group.1.id

1.00

outlet.group.1.name

total

outlet.group.1.realpower

1701.00

outlet.group.1.status

OL

outlet.group.1.voltage

221.00

outlet.group.2.current

4.00

outlet.group.2.id

2.00

outlet.group.2.name

bank1

outlet.group.2.realpower

884.00

outlet.group.2.status

OL

outlet.group.2.voltage

221.00

outlet.group.3.current

3.80

outlet.group.3.id

3.00

outlet.group.3.name

bank2

outlet.group.3.realpower

839.00

outlet.group.3.status

OL

outlet.group.3.voltage

221.00

outlet.group.count

3.00

output.frequency

50.00

output.voltage

221.00

ups.firmware

R01

ups.firmware.aux

3.0.5

ups.id

m-ups-04

ups.mfr.date

04/18/2015

ups.status

OL

About this device

Further system data or configuration example:

Variables per upsrw ups@localhost listing
# TODO: Convert to RW:... and RO:... markup
:; upsrw ups@localhost
[input.sensitivity]
Input power sensitivity
Type: ENUM
Option: "high" SELECTED
Option: "low"

[input.source.preferred]
Description unavailable
Type: UNKNOWN (unrecognized)