Network UPS Tools - Back-UPS CS 350

Click here to see reports of other supported models from APC.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.4.1

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

battery.charge	`95`
battery.charge.low	`10`
battery.charge.warning	`50`
battery.date	`2009/10/11`
battery.mfr.date	`2009/10/11`
battery.runtime	`1237`
battery.runtime.low	`180`
battery.temperature	`29.2`
battery.type	`PbAc`
battery.voltage	`13.6`
battery.voltage.nominal	`12.0`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.4.1`
driver.version.data	`APC HID 0.93`
driver.version.internal	`0.34`
input.voltage	`122.0`
input.voltage.nominal	`120`
output.voltage	`115.0`
output.voltage.nominal	`120.0`
ups.beeper.status	`enabled`
ups.delay.shutdown	`20`
ups.firmware	`805.q8.D`
ups.firmware.aux	`q8`
ups.load	`49.0`
ups.mfr	`American Power Conversion`
ups.mfr.date	`2009/10/11`
ups.model	`Back-UPS CS 350`
ups.productid	`0002`
ups.serial	`4B0941P71480`
ups.status	`OL CHRG`
ups.test.result	`No test initiated`
ups.timer.reboot	`0`
ups.timer.shutdown	`-1`
ups.vendorid	`051d`

Reported at:

This device is known to work with driver hidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

Reported at: