Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from APC.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.8.2

Report #1 with driver apc_modbus (detailed comments available)

This device is known to work with driver apc_modbus.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100.00

battery.date

2021-04-15

battery.date.maintenance

2024-10-07

battery.runtime

6420

battery.temperature

37.30

battery.voltage

26.84

device.mfr

American Power Conversion

device.model

Smart-UPS 750

device.serial

....

device.type

ups

driver.debug

0

driver.flag.allow_killpower

0

driver.name

apc_modbus

driver.parameter.bus

001

driver.parameter.device

002

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.synchronous

auto

driver.state

quiet

driver.version

2.8.2-195-g050e101a1

driver.version.internal

0.10

driver.version.usb

libusb-0.1 (or compat)

experimental.output.energy

525890

input.transfer.high

253

input.transfer.low

208

input.transfer.reason

AcceptableInput

input.voltage

240.39

outlet.group.0.delay.reboot

8

outlet.group.0.delay.shutdown

180

outlet.group.0.delay.start

0

outlet.group.0.name

UPS Outlets

outlet.group.1.delay.reboot

8

outlet.group.1.delay.shutdown

90

outlet.group.1.delay.start

0

outlet.group.1.name

Outlet Group 1

outlet.group.2.delay.reboot

-1

outlet.group.2.delay.shutdown

-1

outlet.group.2.delay.start

-1

outlet.group.2.name


outlet.group.3.delay.reboot

-1

outlet.group.3.delay.shutdown

-1

outlet.group.3.delay.start

-1

outlet.group.3.name


outlet.group.count

1

output.current

0.31

output.frequency

49.97

output.voltage

239.00

ups.delay.reboot

8

ups.delay.shutdown

180

ups.delay.start

0

ups.efficiency

LoadTooLow

ups.firmware

UPS 09.8

ups.id

APCUPS

ups.load

5.19

ups.mfr

American Power Conversion

ups.mfr.date

2013-04-19

ups.model

Smart-UPS 750

ups.power

77.93

ups.power.nominal

750

ups.productid

0003

ups.realpower

25.94

ups.realpower.nominal

500

ups.serial

AS1316113420

ups.status

OL HE

ups.test.result

Passed, Source: Internal

ups.timer.reboot

-1

ups.timer.shutdown

-1

ups.timer.start

-1

ups.vendorid

051d

About this device

APC SMT750i tried with new modbus driver.

Reported at:

2.8.0

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

50

battery.runtime

4320

battery.runtime.low

120

battery.type

PbAc

battery.voltage

27.1

battery.voltage.nominal

24.0

device.mfr

American Power Conversion

device.model

Smart-UPS 750

device.serial

AS1316113420

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.synchronous

auto

driver.version

2.8.0

driver.version.data

APC HID 0.98

driver.version.internal

0.47

driver.version.usb

libusb-1.0.26 (API: 0x1000109)

ups.beeper.status

enabled

ups.delay.shutdown

20

ups.firmware

UPS 09.8 / ID=18

ups.mfr

American Power Conversion

ups.mfr.date

2013/04/19

ups.model

Smart-UPS 750

ups.productid

0003

ups.serial

AS1316113420

ups.status

OL

ups.timer.reboot

-1

ups.timer.shutdown

-1

ups.vendorid

051d

About this device

Following up from report about Smart-UPS X 750 earlier in the linked ticket (about missing data points).

+ > …In the meantime I also got a stand alone Smart-UPS 750 (SMT750I). > If I’m correct, SMT and SMX series are siblings (released about the > same time, share almost identical local LCD interface). SMT are "tower" > while SMX are rack mounted and support external battery packs. > It reports exactly the same set of data as SMX750I.

Reported at:

2.7.2

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

50

battery.runtime

1980

battery.runtime.low

150

battery.type

PbAc

battery.voltage

27.0

battery.voltage.nominal

24.0

device.mfr

American Power Conversion

device.model

Smart-UPS 750

device.serial

3S1415X01827

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.7.2

driver.version.data

APC HID 0.95

driver.version.internal

0.38

ups.beeper.status

enabled

ups.delay.shutdown

20

ups.firmware

UPS 08.8 / ID=18

ups.mfr

American Power Conversion

ups.mfr.date

2014/04/09

ups.model

Smart-UPS 750

ups.productid

0003

ups.serial

3S1415X01827

ups.status

OL

ups.timer.reboot

-1

ups.timer.shutdown

-1

ups.vendorid

051d

About this device

Product Name (at front) is "Smart UPS 750" - it is new version with LCD. Product ID (sticker at back) is SMT750I

Reported at:

2.0.4

Report #1 with driver newhidups (detailed comments available)

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

50

battery.mfr.date

2005/11/25

battery.runtime

900

battery.runtime.low

120

battery.temperature

33

battery.type

PbAc

battery.voltage

27.3

battery.voltage.nominal

24.0

driver.name

newhidups

driver.parameter.port

/dev/usb/hiddev0

driver.version

2.0.4

driver.version.data

APC/CyberPower HID 0.9

driver.version.internal

0.28

input.voltage

228.9

output.voltage

227.5

output.voltage.target.line

230.0

ups.beeper.status

enabled

ups.delay.shutdown

-1

ups.firmware

651.12.I

ups.firmware.aux

4.2

ups.load

53.3

ups.mfr

American Power Conversion

ups.mfr.date

2005/11/25

ups.model

Smart-UPS 750

ups.serial

QS0548341065

ups.status

OL

ups.test.result

No test initiated