Network UPS Tools - Universal UPS F6C1200-UNV

Click here to see reports of other supported models from Belkin.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.2.0

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`30`
battery.charge.warning	`50`
battery.runtime	`210`
battery.type	`PbAc`
battery.voltage	`27.1`
battery.voltage.nominal	`24`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`5`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.2.0-r1090`
driver.version.data	`Belkin HID 0.1`
driver.version.internal	`0.30`
input.frequency	`59.8`
input.frequency.nominal	`60`
input.sensitivity	`normal`
input.transfer.high	`136`
input.transfer.high.max	`141`
input.transfer.high.min	`131`
input.transfer.low	`90`
input.transfer.low.max	`95`
input.transfer.low.min	`85`
input.voltage	`123.3`
input.voltage.nominal	`120`
output.frequency	`59.8`
output.voltage	`122.7`
ups.beeper.status	`enabled`
ups.delay.restart	`0`
ups.delay.shutdown	`0`
ups.firmware	`4`
ups.load	`33`
ups.load.high	`100`
ups.mfr	`Belkin`
ups.mfr.date	`2002/03/01`
ups.model	`UPS`
ups.power.nominal	`1200`
ups.productid	`0912`
ups.serial	`<omitted>`
ups.status	`OL CHRG`
ups.test.result	`No test initiated`
ups.type	`offline`
ups.vendorid	`050d`

Reported at:

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

battery.charge	`100`
battery.charge.low	`30`
battery.charge.warning	`30`
battery.runtime	`120`
battery.type	`PbAc`
battery.voltage	`27.3`
battery.voltage.nominal	`24`
driver.name	`usbhid-ups`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.2.0-`
driver.version.data	`Belkin HID 0.1`
driver.version.internal	`0.30`
input.frequency	`50.0`
input.frequency.nominal	`50`
input.sensitivity	`normal` This variable can be set through upsrw to a string value.
input.transfer.high	`264` This variable can be set through upsrw to a string value.
input.transfer.high.max	`269`
input.transfer.high.min	`259`
input.transfer.low	`187` This variable can be set through upsrw to a string value.
input.transfer.low.max	`192`
input.transfer.low.min	`182`
input.voltage	`247.4`
input.voltage.nominal	`230`
output.frequency	`50.0`
output.voltage	`248.4`
ups.beeper.status	`enabled` This variable can be set through upsrw to a string value.
ups.delay.restart	`0`
ups.delay.shutdown	`0`
ups.firmware	`2`
ups.load	`52`
ups.load.high	`100`
ups.mfr	`Belkin`
ups.model	`UPS`
ups.power.nominal	`1200`
ups.productid	`0912`
ups.serial	`01`
ups.status	`OL CHRG`
ups.test.result	`Done and passed`
ups.type	`offline`
ups.vendorid	`050d`

Reported at:

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

Reported at:

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

Reported at: