Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Cyber Power Systems.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

20

battery.mfr.date

CPS

battery.runtime

1530

battery.runtime.low

300

battery.type

PbAcid

battery.voltage

24.0

battery.voltage.nominal

24

device.mfr

CPS

device.model

CP1500PFCLCD

device.serial

000000000000

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.synchronous

no

driver.version

2.7.4

driver.version.data

CyberPower HID 0.4

driver.version.internal

0.41

input.transfer.high

139

input.transfer.low

88

input.voltage

116.0

input.voltage.nominal

120

output.voltage

140.0

ups.beeper.status

enabled

ups.delay.shutdown

20

ups.delay.start

30

ups.load

25

ups.mfr

CPS

ups.model

CP1500PFCLCD

ups.productid

0501

ups.realpower.nominal

900

ups.serial

000000000000

ups.status

OL

ups.test.result

Done and passed

ups.timer.shutdown

-60

ups.timer.start

-60

ups.vendorid

0764

About this device

Reported at:

Further system data or configuration examples:

Variables per upsrw CP1500PFCLCD@localhost listing
# TODO: Convert to RW:... and RO:... markup
:; upsrw CP1500PFCLCD@localhost
[battery.charge.low]
Remaining battery level when UPS switches to LB (percent)
Type: STRING
Maximum length: 10
Value: 10

[battery.runtime.low]
Remaining battery runtime when UPS switches to LB (seconds)
Type: STRING
Maximum length: 10
Value: 300

[input.transfer.high]
High voltage transfer point (V)
Type: STRING
Maximum length: 10
Value: 139

[input.transfer.low]
Low voltage transfer point (V)
Type: STRING
Maximum length: 10
Value: 88

[ups.delay.shutdown]
Interval to wait after shutdown with delay command (seconds)
Type: STRING
Maximum length: 10
Value: 20

[ups.delay.start]
Interval to wait before (re)starting the load (seconds)
Type: STRING
Maximum length: 10
Value: 30
Commands per upscmd -l CP1500PFCLCD@localhost listing
# TODO: Convert to CMD:... markup
:; upscmd -l CP1500PFCLCD@localhost
Instant commands supported on UPS [CP1500PFCLCD]:
beeper.disable - Disable the UPS beeper
beeper.enable - Enable the UPS beeper
beeper.mute - Temporarily mute the UPS beeper
beeper.off - Obsolete (use beeper.disable or beeper.mute)
beeper.on - Obsolete (use beeper.enable)
load.off - Turn off the load immediately
load.off.delay - Turn off the load with a delay (seconds)
load.on - Turn on the load immediately
load.on.delay - Turn on the load with a delay (seconds)
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test

Report #2 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

58

battery.charge.low

10

battery.charge.warning

20

battery.mfr.date

CPS

battery.runtime

4944

battery.runtime.low

300

battery.type

PbAcid

battery.voltage

24.0

battery.voltage.nominal

24

device.mfr

CPS

device.model

CP1500PFCLCD

device.serial

000000000000

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

15

driver.parameter.port

auto

driver.parameter.synchronous

no

driver.version

2.7.4

driver.version.data

CyberPower HID 0.4

driver.version.internal

0.41

input.transfer.high

139

input.transfer.low

88

input.voltage

120.0

input.voltage.nominal

120

output.voltage

136.0

ups.beeper.status

disabled

ups.delay.shutdown

20

ups.delay.start

30

ups.load

0

ups.mfr

CPS

ups.model

CP1500PFCLCD

ups.productid

0501

ups.realpower.nominal

900

ups.serial

000000000000

ups.status

OL CHRG

ups.test.result

No test initiated

ups.timer.shutdown

-60

ups.timer.start

-60

ups.vendorid

0764

About this device

I’m not able to set battery.charge.low :

:; upsrw -s battery.charge.low=20 -u * -p * CyberPower
OK
:; upsc CyberPower battery.charge.low
10

:; upsrw -s battery.charge.low=5 -u upsuser -p mypwd CyberpowerUPS
OK
:; upsc CyberpowerUPS battery.charge.low
10
Note device might internally only handle certain discrete values for that.

Reported at:

2.7.1

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

20

battery.mfr.date

CPS

battery.runtime

2878

battery.runtime.low

300

battery.type

PbAcid

battery.voltage

16.0

The value should be around 24.

CyberPower states that battery voltage is not supported in this model of UPS. It’s not even shown in their PowerPanel software.

battery.voltage.nominal

24

device.mfr

CP1500PFCLCD

device.model

CRCA102*AF1

device.serial

CPS

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.vendorid

0764

driver.version

2.7.1

driver.version.data

CyberPower HID 0.3

driver.version.internal

0.38

input.transfer.high

139

input.transfer.low

88

input.voltage

120.0

input.voltage.nominal

120

output.voltage

136.0

ups.beeper.status

enabled

ups.delay.shutdown

20

ups.delay.start

30

ups.load

17

ups.mfr

CP1500PFCLCD

ups.model

CRCA102*AF1

ups.productid

0501

ups.realpower.nominal

900

ups.serial

CPS

ups.status

OL

ups.test.result

No test initiated

ups.timer.shutdown

-60

ups.timer.start

-60

ups.vendorid

0764