Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Cyber Power Systems.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.2.0

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

20

battery.runtime

4560

battery.runtime.low

300

battery.type

PbAcid

battery.voltage

20.2

battery.voltage.nominal

12.0

driver.name

usbhid-ups

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.2.0

driver.version.data

APC/CyberPower HID 0.9

driver.version.internal

0.30

input.transfer.high

140

input.transfer.low

100

input.voltage

119.0

input.voltage.nominal

120

output.voltage

119.0

ups.beeper.status

enabled

ups.delay.restart

0

ups.delay.shutdown

-1

ups.mfr

CPS

ups.model

UPS AE550

ups.power.nominal

467

ups.productid

0501

ups.status

OL

ups.test.result

Done and passed

ups.vendorid

0764

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.off

  • beeper.on

  • load.off

  • load.on

  • shutdown.stop