Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Dell.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.0

Report #1 with driver snmp-ups

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100.00

battery.current

0.00

battery.runtime

23100.00

battery.runtime.low

1800.00

battery.temperature

0.00

battery.voltage

77.00

beeper.status

disabled

device.mfr

DELL

device.model

Dell UPS Tower 1920W HV

device.type

ups

driver.name

snmp-ups

driver.parameter.mibs

ietf

driver.parameter.pollinterval

2

driver.parameter.port

166.99.250.11

driver.version

2.6.0-2910:2912M

driver.version.internal

0.50 (mib: ietf 1.3)

input.bypass.phases

0.00

input.current

0.10

input.frequency

49.90

input.frequency.nominal

50.00

input.phases

1.00

input.realpower

0.00

input.transfer.high

0.00

input.transfer.low

166.00

input.voltage

230.00

input.voltage.nominal

240.00

output.current

0.00

output.frequency

49.90

output.frequency.nominal

50.00

output.phases

1.00

output.power.nominal

1920.00

output.realpower

0.00

output.realpower.nominal

1920.00

output.voltage

232.00

output.voltage.nominal

240.00

ups.firmware

01.04.0001

ups.firmware.aux

01.04.9007

ups.load

0.00

ups.mfr

DELL

ups.model

Dell UPS Tower 1920W HV

ups.status

OL

ups.test.result

no test initiated

ups.timer.shutdown

-1

ups.timer.start

-1