Click here to see reports of other supported models from Digitus.
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.4
Report #1 with driver blazer_usb (detailed comments available)
This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.
You can grab a dummy-ups compliant .dev
file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
battery.charge
|
|
battery.voltage
|
|
battery.voltage.high
|
|
battery.voltage.low
|
|
battery.voltage.nominal
|
|
device.mfr
|
|
device.model
|
|
device.type
|
|
driver.name
|
|
driver.parameter.pollinterval
|
|
driver.parameter.port
|
|
driver.parameter.productid
|
|
driver.parameter.subdriver
|
|
driver.parameter.synchronous
|
|
driver.parameter.vendorid
|
|
driver.version
|
|
driver.version.internal
|
|
input.current.nominal
|
|
input.frequency
|
|
input.frequency.nominal
|
|
input.voltage
|
|
input.voltage.fault
|
|
input.voltage.nominal
|
|
output.voltage
|
|
ups.beeper.status
|
|
ups.delay.shutdown
|
|
ups.delay.start
|
|
ups.firmware
|
|
ups.load
|
|
ups.mfr
|
|
ups.model
|
|
ups.productid
|
|
ups.status
|
|
ups.temperature
|
|
ups.type
|
|
ups.vendorid
|
|
About this device
I tested the Digitus DN-170040 and DN-170041 with the blazer_usb driver and it works as expected. The same model was also sold as Voltronic Power GalleonX9-RT LCD-1-3K.
It is connected through USB and is recognized as:
Bus 001 Device 002: ID 0665:5161 Cypress Semiconductor USB to Serial
See also: DigitusDN-170041nutdrv_qx2.7.401.dev
Reported at:
Vendor/Manufacturer information:
Further system data or configuration example:
[digitus]
driver = blazer_usb
port = auto
vendorid = 0665
productid = 5161
subdriver = cypress
desc = "Digitus DN-170041"
2.7.4
Report #1 with driver nutdrv_qx (detailed comments available)
This device is known to work with driver nutdrv_qx.
You can grab a dummy-ups compliant .dev
file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
battery.charge
|
|
battery.energysave
|
|
battery.packs
|
|
battery.protection
|
|
battery.runtime
|
|
battery.voltage
|
|
battery.voltage.high
|
|
battery.voltage.low
|
|
battery.voltage.nominal
|
|
device.model
|
|
device.type
|
|
driver.name
|
|
driver.parameter.chargetime
|
|
driver.parameter.pollfreq
|
|
driver.parameter.pollinterval
|
|
driver.parameter.port
|
|
driver.parameter.runtimecal
|
|
driver.parameter.synchronous
|
|
driver.version
|
|
driver.version.data
|
|
driver.version.internal
|
|
input.current.nominal
|
|
input.frequency
|
|
input.frequency.nominal
|
|
input.phases
|
|
input.transfer.high
|
|
input.transfer.high.max
|
|
input.transfer.high.min
|
|
input.transfer.low
|
|
input.transfer.low.max
|
|
input.transfer.low.min
|
|
input.voltage
|
|
input.voltage.nominal
|
|
outlet.0.switchable
|
|
output.current
|
|
output.current.nominal
|
|
output.frequency
|
|
output.frequency.nominal
|
|
output.phases
|
|
output.power.maximum.percent
|
|
output.power.minimum.percent
|
|
output.powerfactor
|
|
output.voltage
|
|
output.voltage.nominal
|
|
ups.beeper.status
|
|
ups.delay.shutdown
|
|
ups.delay.start
|
|
ups.firmware
|
|
ups.firmware.aux
|
|
ups.load
|
|
ups.power.nominal
|
|
ups.productid
|
|
ups.start.auto
|
|
ups.start.battery
|
|
ups.status
|
|
ups.temperature
|
|
ups.type
|
|
ups.vendorid
|
|
About this device
See also DigitusDN-170041blazer_usb2.7.401.dev
nutdrv_qx
seems to give more information than blazer_usb
. It even detects
the right voltronic
protocol as well as all settings from the ups:
:; upsdrvctl start digitus
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Generic Q* USB/Serial driver 0.28 (2.7.4)
USB communication driver 0.33
Using protocol: Voltronic 0.06
device.serial: UPS reported a non-significant serial [00000000000000]
battery_number: 3
battery_number, settable range: 1..9
bypass_alarm: enabled
battery_alarm: enabled
bypass_when_off: disabled
alarm_control: enabled
converter_mode: disabled
eco_mode: enabled
bypass_forbidding: disabled
site_fault_detection: disabled
advanced_eco_mode: enabled
max_bypass_volt: 264
max_bypass_volt, settable range: 230..264
min_bypass_volt: 170
min_bypass_volt, settable range: 170..220
max_bypass_freq: 53.0
max_bypass_freq, settable range: 51.0..60.0
min_bypass_freq: 47.0
min_bypass_freq, settable range: 40.0..49.0
Reported at:
Further system data or configuration example:
[digitus]
driver = nutdrv_qx
port = auto
desc = "Digitus DN-170041"
default.battery.voltage.high = 39
default.battery.voltage.low = 31.2
default.battery.voltage.nominal = 36
runtimecal = 210,100,660,50
chargetime = 14400
# The values are set according the datasheet.