Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Eaton.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.1

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.runtime

3160

battery.type

PbAc

device.mfr

EATON

device.model

5E 1100i

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.vendorid

0463

driver.version

2.7.1

driver.version.data

MGE HID 1.32

driver.version.internal

0.38

input.voltage

227.0

outlet.1.status

on

outlet.desc

Main Outlet

This variable can be set through upsrw to a string value upto the length of 20 characters.
outlet.id

1

outlet.switchable

no

output.frequency

49.9

output.frequency.nominal

50

output.voltage

228.0

output.voltage.nominal

230

This variable can be set through upsrw to one of the following values:

  • 200

  • 208

  • 220

  • 230

  • 240

ups.beeper.status

enabled

ups.delay.shutdown

20

This variable can be set through upsrw to a string value upto the length of 10 characters.
ups.firmware

01.04.0018

ups.load

8

ups.mfr

EATON

ups.model

5E 1100i

ups.power.nominal

1100

ups.productid

ffff

ups.start.battery

yes

This variable can be set through upsrw to a string value upto the length of 5 characters.
ups.status

OL CHRG

ups.timer.shutdown

-1

ups.vendorid

0463

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.disable

  • beeper.enable

  • beeper.mute

  • beeper.off

  • beeper.on

  • load.off

  • load.off.delay

  • shutdown.stop

About this device

Reported at:

Vendor/Manufacturer information: