Network UPS Tools

Click here to see reports of other supported models from Eaton.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.3-167-g0a00ddb

Report #1 with driver snmp-ups

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge	`100.00`
battery.current	`0.00`
battery.runtime	`42114.00`
battery.voltage	`417.00`
device.mfr	`Eaton Corporation`
device.model	`PXGMS UPS + EATON 93PS`
device.serial	`ID: 007, Msg: 9KA02AB320A01H0`
device.type	`ups`
driver.name	`snmp-ups`
driver.parameter.pollinterval	`2`
driver.parameter.port	`X.X.X.X`
driver.parameter.synchronous	`no`
driver.version	`2.7.3-167-g0a00ddb`
driver.version.data	`pxgx_ups MIB 0.87`
driver.version.internal	`0.91`
input.L1-N.voltage	`231.00`
input.L1.current	`0.00`
input.L1.realpower	`69.00`
input.L2-N.voltage	`231.00`
input.L2.current	`0.00`
input.L2.realpower	`69.00`
input.L3-N.voltage	`229.00`
input.L3.current	`0.00`
input.L3.realpower	`61.00`
input.bypass.L1-N.voltage	`0.00`
input.bypass.L2-N.voltage	`0.00`
input.bypass.L3-N.voltage	`0.00`
input.frequency	`50.00`
input.phases	`3.00`
input.voltage.nominal	`399.00`
output.L1-N.voltage	`230.00`
output.L1.current	`0.00`
output.L1.power.percent	`0.00`
output.L1.realpower	`0.00`
output.L2-N.voltage	`230.00`
output.L2.current	`0.00`
output.L2.power.percent	`0.00`
output.L2.realpower	`0.00`
output.L3-N.voltage	`230.00`
output.L3.current	`0.00`
output.L3.power.percent	`0.00`
output.L3.realpower	`0.00`
output.frequency	`50.00`
output.frequency.nominal	`50.00`
output.phases	`3.00`
output.voltage.nominal	`399.00`
ups.alarm	`Bypass not available! Internal failure!`
ups.firmware	`INV: 2.24.0000 NET: 2.3.7-rc1`
ups.firmware.aux	`2.3.7-rc1`
ups.mfr	`Eaton Corporation`
ups.model	`PXGMS UPS + EATON 93PS`
ups.power	`0.00`
ups.serial	`ID: 007, Msg: 9KA02AB320A01H0`
ups.start.auto	`128.00`
ups.status	`ALARM OL`
ups.temperature	`21.0`
ups.type	`normal`

93PS

2.7.3-167-g0a00ddb

Report #1 with driver snmp-ups

Known supported variables