Click here to see reports of other supported models from Eaton.
|
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.2
Report #1 with driver mge-shut (detailed comments available)
This device is known to work with driver mge-shut.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.capacity
|
|
|
battery.charge
|
|
|
battery.charge.low
|
|
|
battery.charge.restart
|
|
|
battery.protection
|
|
|
battery.runtime
|
|
|
battery.runtime.low
|
|
|
battery.type
|
|
|
device.mfr
|
|
|
device.model
|
|
|
device.serial
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
input.frequency.nominal
|
|
|
input.voltage.nominal
|
|
|
outlet.1.status
|
|
|
output.current
|
|
|
output.frequency
|
|
|
output.frequency.nominal
|
|
|
output.powerfactor
|
|
|
output.voltage.nominal
|
|
|
ups.beeper.status
|
|
|
ups.date
|
|
|
ups.delay.shutdown
|
|
|
ups.delay.start
|
|
|
ups.efficiency
|
|
|
ups.firmware
|
|
|
ups.load
|
|
|
ups.mfr
|
|
|
ups.model
|
|
|
ups.power
|
|
|
ups.power.nominal
|
|
|
ups.productid
|
|
|
ups.realpower
|
|
|
ups.realpower.nominal
|
|
|
ups.serial
|
|
|
ups.shutdown
|
|
|
ups.status
|
|
|
ups.temperature
|
|
|
ups.test.interval
|
|
|
ups.test.result
|
|
|
ups.time
|
|
|
ups.timer.shutdown
|
|
|
ups.timer.start
|
|
|
ups.type
|
|
|
ups.vendorid
|
|
About this device
Reported at:
Vendor/Manufacturer information:
Further system data or configuration examples:
upsrw eaton9px@localhost listing# TODO: Convert to RW:... and RO:... markup
:; upsrw eaton9px@localhost
[battery.charge.low]
Remaining battery level when UPS switches to LB (percent)
Type: STRING
Maximum length: 5
Value: 1
[battery.charge.restart]
Minimum battery level for restart after power off (percent)
Type: STRING
Maximum length: 3
Value: 0
[battery.protection]
Prevent deep discharge of battery
Type: STRING
Maximum length: 5
Value: yes
[battery.runtime.low]
Remaining battery runtime when UPS switches to LB (seconds)
Type: STRING
Maximum length: 10
Value: 180
[output.voltage.nominal]
Nominal output voltage (V)
Type: ENUM
Option: "100"
Option: "110"
Option: "120" SELECTED
Option: "127"
[ups.date]
Internal UPS clock date
Type: STRING
Maximum length: 10
Value: 2018/03/16
[ups.delay.shutdown]
Interval to wait after shutdown with delay command (seconds)
Type: STRING
Maximum length: 10
Value: 20
[ups.delay.start]
Interval to wait before (re)starting the load (seconds)
Type: STRING
Maximum length: 10
Value: 30
[ups.shutdown]
Description unavailable
Type: ENUM
Option: "disabled"
Option: "enabled" SELECTED
[ups.test.interval]
Interval between self tests (seconds)
Type: STRING
Maximum length: 8
Value: 2592000
[ups.time]
Internal UPS clock time
Type: STRING
Maximum length: 10
Value: 01:43:33upscmd -l eaton9px@localhost listing# TODO: Convert to CMD:... markup
:; upscmd -l eaton9px@localhost
Instant commands supported on UPS [eaton9px]:
beeper.disable - Disable the UPS beeper
beeper.enable - Enable the UPS beeper
beeper.mute - Temporarily mute the UPS beeper
beeper.off - Obsolete (use beeper.disable or beeper.mute)
beeper.on - Obsolete (use beeper.enable)
load.off - Turn off the load immediately
load.off.delay - Turn off the load with a delay (seconds)
load.on - Turn on the load immediately
load.on.delay - Turn on the load with a delay (seconds)
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test
