Network UPS Tools - 1440VA-1000W Rack HV UPS

Click here to see reports of other supported models from IBM.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.1

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

battery.charge	`92.00`
battery.current	`0.00`
battery.runtime	`21420.00`
battery.runtime.low	`180.00`
battery.temperature	`0.00`
battery.voltage	`41.00`
beeper.status	`enabled`
device.mfr	`IBM`
device.model	`IBM 1440VA/1000W Rack HV UPS`
device.type	`ups`
driver.name	`snmp-ups`
driver.parameter.mibs	`ietf`
driver.parameter.pollinterval	`2`
driver.parameter.port	`166.99.224.166`
driver.version	`2.6.1`
driver.version.internal	`0.50 (mib: ietf 1.3)`
input.bypass.phases	`0.00`
input.current	`0.00`
input.frequency	`49.90`
input.frequency.nominal	`50.00`
input.phases	`1.00`
input.realpower	`0.00`
input.transfer.high	`286.00`
input.transfer.low	`160.00`
input.voltage	`239.00`
input.voltage.nominal	`230.00`
output.current	`0.00`
output.frequency	`0.00`
output.frequency.nominal	`50.00`
output.phases	`1.00`
output.power.nominal	`1440.00`
output.realpower	`0.00`
output.realpower.nominal	`1000.00`
output.voltage	`0.00`
output.voltage.nominal	`230.00`
ups.firmware	`INV: 01.02.0012`
ups.firmware.aux	`Network Management Card V6.00 01.05.0001`
ups.load	`0.00`
ups.mfr	`IBM`
ups.model	`IBM 1440VA/1000W Rack HV UPS`
ups.start.auto	`yes`
ups.status	`OFF`
ups.test.result	`done and passed`
ups.timer.reboot	`-1`
ups.timer.shutdown	`-1`
ups.timer.start	`-1`

Reported at: