Click here to see reports of other supported models from IBM.
|
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.6.3
Report #1 with driver bcmxcp
This device is known to work with driver bcmxcp.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Known supported variables
This device is known to support the following variables (values are just examples):
|
ambient.temperature
|
|
|
ambient.temperature.high
|
|
|
battery.charge
|
|
|
battery.runtime
|
|
|
battery.voltage
|
|
|
device.mfr
|
|
|
device.model
|
|
|
device.serial
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.version
|
|
|
driver.version.internal
|
|
|
input.current
|
|
|
input.frequency
|
|
|
input.frequency.high
|
|
|
input.frequency.low
|
|
|
input.frequency.nominal
|
|
|
input.transfer.boost.high
|
|
|
input.transfer.high
|
|
|
input.transfer.low
|
|
|
input.transfer.trim.low
|
|
|
input.voltage
|
|
|
input.voltage.nominal
|
|
|
outlet.1.delay.shutdown
|
This variable can be set through upsrw to a string value. |
|
outlet.1.delay.start
|
This variable can be set through upsrw to a string value. |
|
outlet.1.id
|
|
|
outlet.1.status
|
|
|
outlet.2.delay.shutdown
|
This variable can be set through upsrw to a string value. |
|
outlet.2.delay.start
|
This variable can be set through upsrw to a string value. |
|
outlet.2.id
|
|
|
outlet.2.status
|
|
|
output.current
|
|
|
output.current.nominal
|
|
|
output.frequency
|
|
|
output.phases
|
|
|
output.voltage
|
|
|
output.voltage.nominal
|
|
|
ups.beeper.status
|
|
|
ups.firmware
|
|
|
ups.load
|
|
|
ups.mfr
|
|
|
ups.model
|
|
|
ups.power
|
|
|
ups.power.nominal
|
|
|
ups.serial
|
|
|
ups.status
|
|
|
ups.test.result
|
|
Known supported commands
This device is known to support the following NUT’s instant commands:
-
beeper.disable
-
beeper.enable
-
beeper.mute
-
outlet.1.shutdown.return
-
outlet.2.shutdown.return
-
shutdown.return
-
shutdown.stayoff
-
test.battery.start
