Click here to see reports of other supported models from INELT.
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.4
Report #1 with driver nutdrv-qx (detailed comments available)
This device is known to work with driver nutdrv-qx.
You can grab a dummy-ups compliant .dev
file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
battery.charge
|
|
battery.energysave
|
This variable can be set through upsrw to one of the following values:
|
battery.packs
|
This variable can be set through upsrw within the following ranges:
|
battery.protection
|
This variable can be set through upsrw to one of the following values:
|
battery.runtime
|
|
battery.voltage
|
|
battery.voltage.nominal
|
|
device.model
|
|
device.type
|
|
driver.name
|
|
driver.parameter.pollfreq
|
|
driver.parameter.pollinterval
|
|
driver.parameter.port
|
|
driver.parameter.productid
|
|
driver.parameter.protocol
|
|
driver.parameter.subdriver
|
|
driver.parameter.synchronous
|
|
driver.parameter.vendorid
|
|
driver.version
|
|
driver.version.data
|
|
driver.version.internal
|
|
input.current.nominal
|
|
input.frequency
|
|
input.frequency.high
|
This variable can be set through upsrw within the following ranges:
|
input.frequency.low
|
This variable can be set through upsrw within the following ranges:
|
input.frequency.nominal
|
|
input.phases
|
|
input.transfer.high
|
This variable can be set through upsrw within the following ranges:
|
input.transfer.high.max
|
|
input.transfer.high.min
|
|
input.transfer.low
|
This variable can be set through upsrw within the following ranges:
|
input.transfer.low.max
|
|
input.transfer.low.min
|
|
input.voltage
|
|
input.voltage.nominal
|
|
output.current
|
|
output.current.nominal
|
|
output.frequency
|
|
output.frequency.nominal
|
|
output.phases
|
|
output.power.maximum.percent
|
|
output.power.minimum.percent
|
|
output.powerfactor
|
|
output.voltage
|
|
output.voltage.nominal
|
|
ups.beeper.status
|
|
ups.delay.shutdown
|
This variable can be set through upsrw within the following ranges:
|
ups.delay.start
|
This variable can be set through upsrw within the following ranges:
|
ups.firmware
|
|
ups.firmware.aux
|
|
ups.load
|
|
ups.power.nominal
|
|
ups.productid
|
|
ups.start.auto
|
This variable can be set through upsrw to one of the following values:
|
ups.start.battery
|
This variable can be set through upsrw to one of the following values:
|
ups.status
|
|
ups.temperature
|
|
ups.type
|
|
ups.vendorid
|
|
Known supported commands
This device is known to support the following NUT’s instant commands:
-
beeper.disable
-
beeper.enable
-
beeper.toggle
-
bypass.start
-
bypass.stop
-
load.off
-
load.on
-
shutdown.return
-
shutdown.stayoff
-
shutdown.stop
-
test.battery.start
-
test.battery.start.deep
-
test.battery.start.quick
-
test.battery.stop
About this device
Reported at: