Click here to see reports of other supported models from Online.
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.4
Report #1 with driver nutdrv_qx (detailed comments available)
This device is known to work with driver nutdrv_qx.
You can grab a dummy-ups compliant .dev
file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
battery.charge
|
|
battery.packs
|
|
battery.runtime
|
|
battery.voltage
|
|
battery.voltage.high
|
|
battery.voltage.low
|
|
battery.voltage.nominal
|
|
device.mfr
|
|
device.model
|
|
device.type
|
|
driver.name
|
|
driver.parameter.chargetime
|
|
driver.parameter.idleload
|
|
driver.parameter.pollfreq
|
|
driver.parameter.pollinterval
|
|
driver.parameter.port
|
|
driver.parameter.protocol
|
|
driver.parameter.runtimecal
|
|
driver.parameter.synchronous
|
|
driver.version
|
|
driver.version.data
|
|
driver.version.internal
|
|
input.frequency
|
|
input.voltage
|
|
input.voltage.fault
|
|
output.voltage
|
|
ups.beeper.status
|
|
ups.delay.shutdown
|
|
ups.delay.start
|
|
ups.load
|
|
ups.mfr
|
|
ups.model
|
|
ups.status
|
|
ups.temperature
|
|
ups.type
|
|
About this device
Online Xanto S700 (build before 2012). But now it almost works, except parameter override.battery.packs doesn’t work.
Incorrect battery voltage is still reported (similar issue with some other Qx devices is tracked).
The batteries' voltage is 2.27V. So I hoped the parameter override.battery.packs=12 will help. But it doesn’t work. The reported voltage is still 2.27V.
Reported at:
Further system data or configuration example:
[ups]
driver = nutdrv_qx
port = "/dev/ttyUSB0"
desc = "Online Xanto S700"
protocol = q1
override.battery.packs = 12
default.battery.voltage.nominal = 24.00
default.battery.voltage.low = 22.00
default.battery.voltage.high = 26.00
runtimecal = 240,100,720,50
chargetime = 43200
idleload = 10
pollfreq = 5
default.ups.mfr = "Online-UPS"
default.ups.model = "Xanto S700"