Click here to see reports of other supported models from OptiUPS.
|
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.8.0.1
Report #1 with driver optiups (detailed comments available)
This device is known to work with driver optiups.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
|
|
battery.voltage
|
|
|
device.mfr
|
|
|
device.model
|
|
|
device.type
|
|
|
driver.debug
|
|
|
driver.flag.allow_killpower
|
|
|
driver.name
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.synchronous
|
|
|
driver.state
|
|
|
driver.version
|
|
|
driver.version.internal
|
|
|
input.frequency
|
|
|
input.voltage
|
|
|
output.voltage
|
|
|
ups.firmware
|
|
|
ups.load
|
|
|
ups.mfr
|
|
|
ups.model
|
|
|
ups.status
|
|
|
ups.temperature
|
|
About this device
Device dump generated by tools/nut-ddl-dump.sh on Thu, 05 Oct 2023 03:40:11 +1100
Reported at:
Further system data or configuration examples:
upsrw optiups-1440ps@localhost listing# TODO: Convert to RW:... and RO:... markup
:; upsrw optiups-1440ps@localhost
[driver.debug]
Description unavailable
Type: NUMBER
Value: 0
[driver.flag.allow_killpower]
Description unavailable
Type: NUMBER
Value: 0upscmd -l optiups-1440ps@localhost listing# TODO: Convert to CMD:... markup
:; upscmd -l optiups-1440ps@localhost
Instant commands supported on UPS [optiups-1440ps]:
driver.killpower - Description unavailable
driver.reload - Description unavailable
driver.reload-or-error - Description unavailable
driver.reload-or-exit - Description unavailable
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.failure.start - Start a simulated power failure
