Click here to see reports of other supported models from PowerWalker.
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.4
Report #1 with driver usbhid-ups (detailed comments available)
This device is known to work with driver usbhid-ups.
You can grab a dummy-ups compliant .dev
file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
battery.charge
|
|
battery.runtime
|
|
battery.type
|
|
battery.voltage
|
|
device.mfr
|
|
device.model
|
|
device.serial
|
|
device.type
|
|
driver.name
|
|
driver.parameter.pollfreq
|
|
driver.parameter.pollinterval
|
|
driver.parameter.port
|
|
driver.parameter.productid
|
|
driver.parameter.synchronous
|
|
driver.parameter.vendorid
|
|
driver.version
|
|
driver.version.data
|
|
driver.version.internal
|
|
ups.load
|
|
ups.mfr
|
|
ups.model
|
|
ups.productid
|
|
ups.serial
|
|
ups.status
|
|
ups.vendorid
|
|
About this device
PowerWalker VI 2200 SHL
Variables and instant commands seem to be not supported:
:; upsrw powerwalker
:; upscmd -l powerwalker
Instant commands supported on UPS [powerwalker]:
More detailed USB dumps in the GitHub ticket
Reported at:
Further system data or configuration example:
lsusb
listing:; lsusb | grep 06da
Bus 003 Device 007: ID 06da:ffff Phoenixtec Power Co., Ltd
Report #2 with driver usbhid-ups (detailed comments available)
This device is known to work with driver usbhid-ups.
You can grab a dummy-ups compliant .dev
file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
battery.charge
|
|
battery.runtime
|
|
battery.type
|
|
battery.voltage
|
|
device.mfr
|
|
device.model
|
|
device.serial
|
|
device.type
|
|
driver.name
|
|
driver.parameter.pollfreq
|
|
driver.parameter.pollinterval
|
|
driver.parameter.port
|
|
driver.parameter.productid
|
|
driver.parameter.synchronous
|
|
driver.parameter.vendorid
|
|
driver.version
|
|
driver.version.data
|
|
driver.version.internal
|
|
ups.load
|
|
ups.mfr
|
|
ups.model
|
|
ups.productid
|
|
ups.serial
|
|
ups.status
|
|
ups.vendorid
|
|
About this device
I would love to be able to control for example the beep or get all values by upsc command.
I did some quick and dirty fixes to get more information for my Monitoring.
More detailed USB dumps in the ticket.
Reported at: