Click here to see reports of other supported models from PowerWalker.
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.4
Report #1 with driver usbhid-ups (detailed comments available)
This device is known to work with driver usbhid-ups.
You can grab a dummy-ups compliant .dev
file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
battery.charge
|
|
battery.runtime
|
|
battery.type
|
|
battery.voltage
|
|
battery.voltage.nominal
|
|
device.mfr
|
|
device.model
|
|
device.serial
|
|
device.type
|
|
driver.name
|
|
driver.parameter.pollfreq
|
|
driver.parameter.pollinterval
|
|
driver.parameter.port
|
|
driver.parameter.synchronous
|
|
driver.version
|
|
driver.version.data
|
|
driver.version.internal
|
|
ups.load
|
|
ups.mfr
|
|
ups.model
|
|
ups.productid
|
|
ups.serial
|
|
ups.status
|
|
ups.vendorid
|
|
About this device
I bought a Powerwalker VI 750T/HID, but the VI 500T/HID is basically the same model, just less power. And the VI 1000T/HID and VI 1500T/HID come with two batteries, more outlets and a fan.
UPS/driver does not show input voltage
Reported at:
Vendor/Manufacturer information:
Further system data or configuration example:
[ups]
driver = usbhid-ups
port = auto