Click here to see reports of other supported models from Riello.
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.4
Report #1 with driver riello_usb (detailed comments available)
This device is known to work with driver riello_usb.
You can grab a dummy-ups compliant .dev
file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
battery.capacity
|
|
battery.charge
|
constant; does not update (see also iDialog 800 entry) |
battery.runtime
|
constant; equals 0xFFFF * 60 |
battery.voltage
|
|
battery.voltage.nominal
|
|
device.mfr
|
|
device.model
|
|
device.serial
|
|
device.type
|
|
driver.name
|
|
driver.parameter.pollinterval
|
|
driver.parameter.port
|
|
driver.parameter.synchronous
|
|
driver.version
|
|
driver.version.internal
|
|
input.bypass.frequency
|
constant/out-of-range |
input.bypass.voltage
|
constant/out-of-range |
input.frequency
|
|
input.voltage
|
|
output.L1.current
|
vendor web page indicates that this is a single-phase unit. |
output.L1.power
|
|
output.L1.realpower
|
|
output.L2.current
|
|
output.L2.power
|
|
output.L2.realpower
|
|
output.L3.current
|
|
output.L3.power
|
|
output.L3.realpower
|
|
output.frequency
|
|
output.frequency.nominal
|
|
output.power.percent
|
unimplemented? |
output.voltage
|
|
output.voltage.nominal
|
|
ups.firmware
|
|
ups.load
|
unimplemented? |
ups.mfr
|
|
ups.model
|
|
ups.power.nominal
|
|
ups.productid
|
|
ups.realpower.nominal
|
|
ups.serial
|
|
ups.status
|
|
ups.temperature
|
constant/out-of-range |
ups.vendorid
|
|
About this device
See discussion here: http://lists.alioth.debian.org/pipermail/nut-upsdev/2017-November/007357.html
The IPG seems to have similar firmware to the iDialog 800: http://networkupstools.org/ddl/Riello/iDialog_800_IDG_800.html
Reported at: