Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Tripp Lite.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.4.3

Report #1 with driver tripplite_usb (detailed comments available)

This device is known to work with driver tripplite_usb.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.test.status

Battery OK

battery.voltage

14.56

battery.voltage.nominal

12

device.mfr

Tripp Lite

device.model

OMNISMART500

device.type

ups

driver.name

tripplite_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.4.3

driver.version.internal

0.20

input.voltage

108.60

input.voltage.nominal

120

output.voltage

113.0

ups.debug.V

31 30 32 30 58 58 0d '1020XX.'

ups.debug.load_banks

0

ups.delay.shutdown

64

This variable can be set through upsrw to a string value.

ups.firmware

F0966.A

ups.firmware.aux

protocol 2001

ups.mfr

Tripp Lite

ups.model

OMNISMART500

ups.power.nominal

500

ups.productid

0001

ups.status

OL

ups.vendorid

09ae

Known supported commands

This device is known to support the following NUT’s instant commands:

  • shutdown.return

Report #2 with driver tripplite_usb (detailed comments available)

This device is known to work with driver tripplite_usb.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.test.status

Battery bad - replace

After the UPS has come back to a full charge I get a red light on the front of the UPS and I get this. I made the bad battery message go away by running a ‘Self Test’ by holding down the Mute button for two seconds while the unit is powered on and everything connected to it is running.

battery.voltage

14.56

battery.voltage.nominal

12

device.mfr

Tripp Lite

device.model

OMNISMART500

device.type

ups

driver.name

tripplite_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.4.3

driver.version.internal

0.20

input.voltage

109.23

input.voltage.nominal

120

output.voltage

113.5

ups.debug.V

31 30 32 30 58 58 0d '1020XX.'

ups.debug.load_banks

0

ups.delay.shutdown

64

This variable can be set through upsrw to a string value.

ups.firmware

F0966.A

ups.firmware.aux

protocol 2001

ups.mfr

Tripp Lite

ups.model

OMNISMART500

ups.power.nominal

500

ups.productid

0001

ups.status

OL

ups.vendorid

09ae

Known supported commands

This device is known to support the following NUT’s instant commands:

  • shutdown.return