Click here to see reports of other supported models from Tripp Lite.
|
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.4.3
Report #1 with driver tripplite_usb (detailed comments available)
This device is known to work with driver tripplite_usb.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
battery.charge doesn’t report correct charge level when the UPS is On Battery.
It just reports |
|
battery.voltage
|
|
|
battery.voltage.nominal
|
|
|
device.mfr
|
|
|
device.model
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.product
|
|
|
driver.version
|
|
|
driver.version.internal
|
|
|
input.frequency
|
|
|
input.frequency.nominal
|
|
|
input.voltage
|
|
|
input.voltage.maximum
|
|
|
input.voltage.minimum
|
|
|
input.voltage.nominal
|
|
|
outlet.1.desc
|
|
|
outlet.1.id
|
|
|
outlet.1.switch
|
|
|
outlet.1.switchable
|
|
|
outlet.2.desc
|
|
|
outlet.2.id
|
|
|
outlet.2.switch
|
|
|
outlet.2.switchable
|
|
|
outlet.3.desc
|
|
|
outlet.3.id
|
|
|
outlet.3.switchable
|
|
|
ups.debug.D
|
|
|
ups.debug.S
|
|
|
ups.debug.T
|
|
|
ups.debug.V
|
|
|
ups.debug.load_banks
|
|
|
ups.delay.shutdown
|
|
|
ups.firmware
|
|
|
ups.firmware.aux
|
|
|
ups.id
|
|
|
ups.load
|
|
|
ups.mfr
|
|
|
ups.model
|
|
|
ups.power.nominal
|
|
|
ups.productid
|
|
|
ups.status
|
|
|
ups.temperature
|
|
|
ups.vendorid
|
|
About this device
Reported at:
