Network UPS Tools - SMART3000RM2U

Click here to see reports of other supported models from Tripp Lite.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.1

This device is known to work with driver tripplite_usb.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

battery.charge	`40`
battery.test.status	`Battery OK`
battery.voltage	`52.00`
battery.voltage.nominal	`48`
device.mfr	`Tripp Lite`
device.model	`SMART3000RM2U`
device.type	`ups`
driver.name	`tripplite_usb`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.version	`2.7.1`
driver.version.internal	`0.20`
input.frequency	`59.9`
input.frequency.nominal	`60`
input.voltage	`123`
input.voltage.maximum	`125`
input.voltage.minimum	`119`
input.voltage.nominal	`120`
outlet.1.desc	`Load 1`
outlet.1.id	`1`
outlet.1.switch	`1`
outlet.1.switchable	`1`
outlet.2.desc	`Load 2`
outlet.2.id	`2`
outlet.2.switch	`1`
outlet.2.switchable	`1`
outlet.3.desc	`Load 3`
outlet.3.id	`3`
outlet.3.switch	`1`
outlet.3.switchable	`1`
outlet.4.desc	`Load 4`
outlet.4.id	`4`
outlet.4.switchable	`0`
ups.debug.D	`37 42 38 32 0d 00 00 '7B82...'`
ups.debug.S	`31 30 30 00 28 30 0d '100..0.'`
ups.debug.T	`39 37 32 35 37 31 0d '972571.'`
ups.debug.V	`31 30 38 33 58 58 0d '1083XX.'`
ups.debug.load_banks	`3`
ups.delay.shutdown	`64`
ups.firmware	`F1115.B`
ups.firmware.aux	`protocol 3003`
ups.id	`65535`
ups.load	`9`
ups.mfr	`Tripp Lite`
ups.model	`SMART3000RM2U`
ups.power.nominal	`3000`
ups.productid	`0001`
ups.status	`OL`
ups.temperature	`33.9`
ups.vendorid	`09ae`

Reported at:

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

This device is known to support the following variables (values are just examples):

battery.charge	`100.0`
battery.voltage	`005.1`
driver.name	`snmp-ups`
driver.parameter.mibs	`ietf`
driver.parameter.pollfreq	`15`
driver.parameter.port	`ups01`
driver.parameter.snmp_version	`v2c`
driver.version	`2.0.3`
driver.version.internal	`0.41`
input.voltage	`000.0`
ups.firmware.aux	`12.03.0024`
ups.load	`068.0`
ups.mfr	`Tripp Lite`
ups.model	`SMART3000RM2U`
ups.status	`OL`

The UPS does not say that it is on battery, which means that there is no way for NUT to say it.

Reported at: