Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Tripp Lite.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.3

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

This variable can be set through upsrw to a string value.
battery.charge.warning

30

battery.runtime

9362

battery.temperature

42.9

battery.type

PbAc

battery.voltage

27.7

battery.voltage.nominal

24.0

device.mfr

TRIPP LITE

device.model

SMART750SLT

device.serial

9652ALCSM519900051

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.6.5-3780M

driver.version.data

TrippLite HID 0.8

driver.version.internal

0.37

input.frequency

59.9

input.transfer.high

145.0

This variable can be set through upsrw to a string value.
input.transfer.low

83.0

This variable can be set through upsrw to a string value.
input.voltage

120.9

input.voltage.nominal

120

output.frequency

0.0

output.frequency.nominal

60

output.voltage

0.0

output.voltage.nominal

120

ups.beeper.status

enabled

ups.delay.shutdown

20

This variable can be set through upsrw to a string value.
ups.delay.start

30

This variable can be set through upsrw to a string value.
ups.firmware

50

ups.mfr

TRIPP LITE

ups.model

SMART750SLT

ups.power.nominal

750

ups.productid

3010

ups.serial

9652ALCSM519900051

ups.status

OL

ups.timer.reboot

-1

ups.timer.shutdown

-1

ups.timer.start

-1

ups.vendorid

09ae

ups.watchdog.status

0

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.disable

  • beeper.enable

  • beeper.mute

  • beeper.off

  • beeper.on

  • load.off

  • load.off.delay

  • load.on

  • load.on.delay

  • reset.watchdog

  • shutdown.reboot

  • shutdown.return

  • shutdown.stayoff

  • shutdown.stop

  • test.battery.start.deep

  • test.battery.start.quick

  • test.battery.stop

About this device

Reported at: