Click here to see reports of other supported models from Tripp Lite.
|
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.7.4
Report #1 with driver usbhid-ups (detailed comments available)
This device is known to work with driver usbhid-ups.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
|
|
battery.charge.low
|
|
|
battery.charge.warning
|
|
|
battery.runtime
|
|
|
battery.temperature
|
|
|
battery.type
|
|
|
battery.voltage
|
|
|
battery.voltage.nominal
|
|
|
device.mfr
|
|
|
device.model
|
|
|
device.serial
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.synchronous
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
input.frequency
|
|
|
input.transfer.high
|
should not be 0.0 |
|
input.transfer.low
|
should not be 0.0 |
|
input.voltage
|
|
|
input.voltage.nominal
|
|
|
output.current
|
|
|
output.frequency
|
|
|
output.frequency.nominal
|
|
|
output.voltage
|
should not be 0 for non-zero load |
|
output.voltage.nominal
|
|
|
ups.beeper.status
|
|
|
ups.delay.shutdown
|
|
|
ups.delay.start
|
|
|
ups.load
|
|
|
ups.mfr
|
|
|
ups.model
|
|
|
ups.power
|
should not be 0.0 for non-zero load |
|
ups.power.nominal
|
|
|
ups.productid
|
|
|
ups.serial
|
|
|
ups.status
|
|
|
ups.timer.reboot
|
|
|
ups.timer.shutdown
|
|
|
ups.timer.start
|
|
|
ups.vendorid
|
|
|
ups.watchdog.status
|
|
About this device
Reported at:
Vendor/Manufacturer information:
