NAME
tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment
SYNOPSIS
tripplitesu -h
tripplitesu -a UPS_NAME [OPTIONS]
Note
|
This man page only documents the hardware-specific features of the tripplitesu driver. For information about the core driver, see nutupsdrv(8). |
SUPPORTED HARDWARE
This driver supports the Tripp Lite SmartOnline family (via the serial port).
EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5):
- lowbatt=num
-
Set the low battery warning threshold in percent at which shutdown is initiated by upsmon(8). By default, the UPS may not report low battery until there are only a few seconds left. Common values are around 25—30.
AUTHOR
Allan N. Hessenflow <allanh@kallisti.com>
SEE ALSO
The core driver:
Other drivers for Tripp-Lite hardware:
Internet resources:
The NUT (Network UPS Tools) home page: https://www.networkupstools.org/