Network UPS Tools - Raptor 2000

Click here to see reports of other supported models from Powercom.

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.4

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge	`74`
battery.charge.low	`10`
battery.charge.warning	`30`
battery.date	`2014/01/15`
battery.runtime	`592`
battery.type	`PbAc`
device.mfr	`POWERCOM Co.,LTD`
device.model	`HID UPS Battery`
device.serial	`004-0D9F-000`
device.type	`ups`
driver.name	`usbhid-ups`
driver.parameter.pollfreq	`30`
driver.parameter.pollinterval	`2`
driver.parameter.port	`auto`
driver.parameter.product	`HID UPS Battery`
driver.parameter.productid	`0004`
driver.parameter.serial	`004-0D9F-000`
driver.parameter.synchronous	`no`
driver.parameter.vendor	`POWERCOM Co.,LTD`
driver.parameter.vendorid	`0D9F`
driver.version	`2.7.4`
driver.version.data	`PowerCOM HID 0.5`
driver.version.internal	`0.41`
input.frequency	`50.0`
input.voltage	`220.0`
input.voltage.nominal	`240`
output.frequency	`50.0`
output.voltage	`220.0`
output.voltage.nominal	`240`
ups.date	`2014/01/15`
ups.delay.shutdown	`20`
ups.delay.start	`60`
ups.load	`11`
ups.mfr	`POWERCOM Co.,LTD`
ups.model	`HID UPS Battery`
ups.productid	`0004`
ups.serial	`004-0D9F-000`
ups.status	`OL CHRG`
ups.test.result	`Done and passed`
ups.timer.shutdown	`0`
ups.timer.start	`971220`
ups.vendorid	`0d9f`

About this device

The beeper is broken identically to RPT-600AP, which behaves almost identically — probably the same USB chip, just different batteries. Status is always disabled.

The device also disappears every now and then. The USB port appears to reset until usbhid-ups is claimed, so I’ve written an udev rule:

  # This device resets itself after a second if no-one claims it.
  # so we claim it ASAP
  SUBSYSTEM=="usb", ACTION=="add", ATTR{idVendor}=="0d9f", ATTR{idProduct}=="0004", RUN+="/usr/bin/systemctl restart nut-driver"

Reported at:

https://github.com/networkupstools/nut/issues/633#issuecomment-445472803

Further system data or configuration example:

lsusb listing

:; lsusb
Bus 001 Device 044: ID 0d9f:0004 Powercom Co., Ltd
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0d9f Powercom Co., Ltd
  idProduct          0x0004
  bcdDevice            0.02
  iManufacturer           3 POWERCOM Co.,LTD
  iProduct                1 HID UPS Battery
  iSerial                 2 004-0D9F-000
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     996
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval             100
Device Status:     0x0001
  Self Powered